Say goodbye to the hassle of using balls with the revolutionary Thermal Twist. They have incorporated vortex airflow and a robust metal core, available in two premium materials: SS316 Stainless Steel or Grade 2 Titanium. With the Vortex airflow, you can enjoy a seamless vaping experience without the need to stir your bowl when using 0.15-0.2g loads. Just load a single SQP of herb, place the housing on the bowl, inhale, and watch the magic unfold. The airflow does the work for you, eliminating the need to tamp your bowl. Plus, the Thermal Twist doubles as an exceptional micro-doser, efficiently diffuses down to approximately 0.05g.
Simplicity is key with the Thermal Twist. It comes fully equipped with a handle installed on the heater coil and the housing prepped for a hassle-free plug-and-play experience. No more worrying about spilling balls or mis-installing the handle during setup. Plug the heater into the front of the PID, connect the power adapter to the back, power it up, set your desired temperature, and you’re good to go. The stand is thoughtfully designed to minimize heat transfer, keeping it where it belongs, inside the housing.
The Thermal Twist offers a wide range of experiences, from low-temperature terpy hits to thick clouds. It boasts fast cloud production and exceptionally smooth seshes, providing an unmatched experience.
We recommend a set temperature range on the PID of 330-390°C (626-734°F), but feel free to adjust it to your liking.
Choose your preferred material for the Thermal Twist Injector:
- 316 Stainless Steel for enhanced flavor and lightweight design
- Grade 2 Titanium for smoother clouds
What’s included in the kit:
- Thermal Twist Injector (choose SS316 Stainless Steel or GR2 Titanium)
- Micro PID (CE/ROHS Certified)
- 20mm Heater Coil with Silicone Handle Pre-installed（120v or 220v）
- Pre-installed Heat Guard for the Thermal Twist Housing
- Glass Bowl with Side-Carb (approx. 0.4g max capacity) – 14.4mm Male Joint Bowl
- 14.4mm to 18.8mm Male Adapter
- Keck Clip
- Steel Stand
- SQP – Scoop and Tamper
- Wood Cleaning Brush
- Spare Screens
- USA/EU Plug
- Instructions Sheet
Warranty Info: Enjoy peace of mind with our one-year warranty on the PID controller and Heater Coil. Please report any broken glassware upon arrival.
Usage Notes:
- For 14mm bowl with keck clip and 18mm adapter, ensure a secure fit by giving it a gentle push and twist, then install the keck clip to prevent unintentional rotation.
- Avoid leaving the Thermal Twist housing on the bowl, place it on the stand after use.
- To prevent herb compaction, the integrated side carb/stopper in the bowl can be removed to clear excess vapor.
- The Heat Guard provides maximum protection and convenience, making it easy to align the injector housing into your bowl. Perform a burn-off cycle on the housing before use and allow 5 minutes of heating at 390°C (734°F) before first use.
Additional Features: The Thermal Twist is compatible with the 18mm C/C Quartz Cap vaporizer by the Rogue Wax Works. Simply place the housing over the glass chamber and use your Quartz Cap vaporizer as a diffuser-style bowl. Adjust the mesh screen inside the Quartz Cap chamber for a full hybrid experience, and remember to reduce the PID temperature by 70-100°C when heat soaking.